310 • Addendums Nano Series GigE Vision Camera
Automatic Windows Driver Installation
The first time the remote serial port control is enabled on a system, an automatic Windows driver
update executes as shown in the following screen captures.
This update procedure will not repeat on an update of the framework unless the serial port control
is first disabled and then follow by an un-install of the Nano driver.
Serial Port Parameters
• The Port Controls such as baud rate and Parity are set by the host computer executing a
third party program or API (Data Size=8 bit, Parity=none and Baud Rate = 9600 to 460kb).
To Next Page
Loading...
