Need help?Do you have a question about the DAN C4-SFX and is the answer not in the manual?
General| Type | Mini-ITX Case |
|---|---|
| Material | Aluminum |
| Motherboard Support | Mini-ITX |
| Power Supply Support | SFX, SFX-L |
| Expansion Slots | 3 |
| Color | Black |
| Cooling Support | Air or AIO (up to 240mm) |
| Drive Bays | 2 x 2.5" |
Ensure adequate cooling performance by placing the case free-standing with 15cm distance.
Dispose of the case and components responsibly at designated electronic waste collection points.
Modifications, negligent handling, or serial number tampering will void the warranty.
DAN Cases GmbH is not liable for damage from improper handling. Check component compatibility.
The packaging is recyclable. Please recycle according to local regulations.
Allocate sufficient time for component assembly to ensure a careful build process.
Ensure components are free of electricity and ground yourself to prevent static discharge damage.
Use minimal force for mounting components and tightening screws to avoid damage.
Use a Phillips cross-head screwdriver and align screws at a right angle to prevent thread damage.
Overview of all included screws and clips with their respective counts for assembly.
Recommended fan setup for optimal airflow and cooling performance with air coolers.
Recommended fan and radiator setup for optimal performance with All-in-One liquid coolers.
Instructions for detaching the side and top panels of the case for access.
Mounting key internal components like PSU brackets, motherboard, and other hardware.
Connecting power and data cables, including PSU and system wiring.
Installing fans, GPU bracket, and the graphics card into the case.
Reattaching side and front panels to complete the case build.
Mounting fans onto the AIO radiator assembly prior to system installation.
Installing the AIO liquid cooler onto the CPU and securing it properly.
Securing the AIO radiator assembly to the PC case chassis.
Installing a GPU holder to create more space between the PSU and GPU.
Preparing the power supply unit for front mounting by attaching screws.
Installing the power supply unit into the front mount position within the case.
Detailed list of all case components with their corresponding part numbers.
Acknowledgements to individuals and communities who contributed to the C4-SFX project.
Links and references for checking component compatibility and warranty claims.
To Next Page