To Next Page

To Previous Page

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side for any

length of time during this process, it must be allowed

to remain upright for 6 hours before plugging it in

to avoid damage to the internal components.

1. Remove the hinge cover and upper hinge from

the top right side of the cabinet. Remove the

screw hole covers from the top left side of the

cabinet.

2. Remove the freezer door from the cabinet. Move

the hinge plug from the top left to the top right

side of the door.

3. Remove the center hinge from the right side

cabinet. Remove the screw hole covers from the

left side of the cabinet.

4. Remove the refrigerator door from the cabinet.

Move the hinge plug from the top left to the top

right side of the door.

5. Remove the leveling leg from the bottom left side

of the cabinet. Get the left lower hinge from the

accessory bag and install it on the left side of the

cabinet. Reinstall the leveling leg on the bottom

left side of the cabinet. Remove the leveling leg

and the lower hinge from the bottom right side

of the cabinet. Reinstall the leveling leg on the

bottom right side of the cabinet.

6. Install the refrigerator door. Install the center

hinge on the left side of the cabinet. Install

the screw hole covers on the right side of the

cabinet.

7. Install the freezer door. Install the upper hinge

on the top left side of the cabinet. Install the

screw hole covers on the top right side of the

cabinet.

Note: Ensure the rubber gaskets are making a good

seal with the cabinet all the way around the doors

before tightening the hinge screws.

Danby DCR047A1BBSL Owner's Manual

Other manuals for Danby DCR047A1BBSL