EasyManua.ls Logo

Danby DDR050BCWDB-ME-6 - Bucketless Drain Requirements; Drain Hose Positioning

Danby DDR050BCWDB-ME-6
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BUCKETLESS DRAIN
Ensure that the dehumidifi er is placed on a fl at, level
surface to prevent toppling or sliding. The tilt angle
needs to be less than 1 degree.
OPERATING INSTRUCTIONS
X
10cm or more
X
X
Ensure that the drain hose is properly connected
before turning on bucketless mode.
There is no drain pump in this dehumidifi er, the
drain operates through gravity. The drain hose must
angle down from the back of the dehumidifi er at
least 10 cm or more. The hose cannot lie fl at or be
angled upward.
9

Related product manuals