ASSEMBLY
1. Remove all packaging.
2. Lift the dehumidifi er by the handle, pull out the power cable and rotate the dehumidifi er 90 degrees
clockwise.
3. Place the dehumidifi er onto the water bucket according to the “ALIGN” labels and press down gently
until it clicks into place.
INSTALLATION INSTRUCTIONS
3
CASTER INSTALLATION
1. Slide the four casters into the slots on the bottom of the dehumidifi er.
2. Press down on the caster lock to secure the caster.
3. To remove the casters, lift up the caster lock with a screwdriver and then slide the caster out.
To Next Page
Loading...
