EasyManua.ls Logo

Danby DDR050BCWDB-ME-6 - Water Drainage Methods; Continuous Drain Setup

Danby DDR050BCWDB-ME-6
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Continuous Drain
Water can be removed using the continuous drain
with either the provided drain hose or a standard
garden hose.
The provided clear plastic drain hose is 2 feet (0.6
m) long. If there is no available drain within range
of the dehumidifi er, a garden hose can be attached
instead. Please note, the garden hose should be no
longer than 6 feet (1.8 m). If the drain hose is too
long water may not drain completely which can
lead to stagnant water and mildew build up inside
the hose.
To attach to continuous drain hose:
1. Remove the cover located on the back of the
water bucket.
2. Remove the plug from the continuous drain outlet
and attach the desired hose.
3. Direct the other end of the hose to a bucket or
oor drain.
Ensure that the hose is not bent and goes straight
down from the back of the appliance. The
continuous drain is only activated by gravity so any
bends or upward motion in the hose will stop the
water from draining.
OPERATING INSTRUCTIONS
7
1
2
3

Related product manuals