d&b audiotechnik 10D - Operating Conditions; Dimensions and Weight

Digital Signal Processing
System start-up time 17 sec.
Sampling rate 96 kHz / 27 Bit ADC / 24 Bit DAC
Latency analog input 0.3 msec.
Latency digital input (AES) 0.3 msec.
48 kHz / 96 kHz
Input dynamic > 124 dB
ADC dynamic > 110 dB
DAC dynamic > 110 dB
Equalizer two user definable 16-band equalizers
Filter types: PEQ/Notch/HiShlv/LoShlv/Asym
Delay 0.3 msec. - 10 sec.
Frequency generator Pink noise or Sine wave 10 Hz – 20 kHz
Operating conditions
Temperature range* –10 °C ... +40 °C / +14 °F ... +104 °F
*continuous operation
Temperature range** –10 °C ... +50 °C / +14 °F ... +122 °F
**reduced output power or short term operation
Storage temperature –20 °C ... +70 °C / –4 °F ... +158 °F
Humidity (rel.), long term average 70%
Fan noise emission
Rack mounted, measured on axis, 1 m to front panel, A-weighting
Idle 32 dB(A)
Max. RPM 48 dB(A)
Ambient temperature 22 °C / 71.6 °F
Dimensions and weight
Height x width x depth
2 RU x 19" x 435 mm
2 RU x 19" x 17.1"
Weight 10.6 kg / 23.4 lb
10D enclosure dimensions in mm [inch]
d&b 10D/30D Manual 1.10 en10