d&b audiotechnik 10D - Remote Control and System Integration

Remote control and full system integration are realized using the
d&b ArrayCalc simulation software and R1 Remote control
software V2. The 10D/30D amplifiers include two Ethernet ports
on RJ 45 connectors. Both, Ethernet and dbCAN protocols are
incorporated. The Ethernet protocol implemented in the d&b R1
Remote control software V2 and the 10D/30D amplifiers is a
protocol developed by the OCA Alliance (Open Control
Architecture Alliance), of which d&b is a founding member. For
further details, please refer to the OCA website:
www.oca-alliance.com.
d&b 10D/30D Manual 1.10 en8