d&b audiotechnik 30D - AmpPreset Management; AmpPreset Types and Functions

12.5.5. AmpPresets
d&b amplifiers provide AmpPresets which contain all important
user settings of the entire device, such as input, output and channel
configurations, EQ and delay settings.
Using AmpPresets, a sound system can be operated in different
configurations (e.g. "Conference", "Music" or "Emergency Call")
without the need of transferring all detailed settings of the devices
used.
There are three types of AmpPresets memories (slots):
User: Nine AmpPresets which can be accessed locally or
via the d&b Remote network. These presets are used
to set the complete device to a previously defined
configuration for a particular application. They can
be named individually.
Alarm:
Three AmpPresets which can only be accessed via
the d&b Remote network and/or GPIOs. Intended for
use in alarm systems to protect the system settings
against local modifications.
Backup:
Three AmpPresets which can only be accessed via
the d&b Remote network and/or GPIOs. Intended for
temporary use to back up the current system settings
when another AmpPreset is loaded.
Selecting «AmpPresets» opens the corresponding subscreen which
provides the functions «Select», «Name», «Recall», «Store» and
«Clear».
At the bottom of the screen, the last AmpPreset number loaded is
indicated. If any setting has been modified since loading,
«(modified)» will be added to the corresponding entry.
Select:
Provides access to the nine (9) user preset memories
(slots) for loading, saving or clearing data.
Name: Enables the assignment or editing of a preset name
(maximum of 15 characters).
The input mask which appears allows either lower-case
or upper-case characters by toggling the
corresponding button («abc») on the bottom left.
▪ Wrong entries can be corrected by selecting the
Erase button (
) on the bottom right.
▪ Selecting «OK» on the top right confirms the entry,
closes the input mask and switches back to the
AmpPresets screen.
▪ Selecting the Back button (
) on the top left cancels
any entry and switches back to the AmpPresets
screen keeping the previous entry.
d&b 10D/30D Manual 1.10 en 57