d&b audiotechnik 30D - Error Messages by ID (122-169)

Id Display text Eventlog text Description Location Possible reasons
122 CAN warning CAN warning %d
(remote flags %02X,
dbCan flags %02X)
CAN warning (External: CAN
cabling)
CAN cabling or
multiple RemIds.
124 OCA remote error OCA remote error
%u
OCA remote error Software error.
150 Speaker imp. fault (empty) Load Monitoring
impedance error
(External: speaker,
cabling)
Speaker defect,
cable.
153 Amp. low
temperature
Channel '%c': Amp.
temperature too low
(%d°C)
Amp temperature
warning
Amp Ext. conditions, sensor
fault.
160 Input fallback Input fallback (A1=
%d, A2=%d, D1=%d,
D2=%d)
Input fallback was
activated
(External: Cabling)
161 Input monitoring fault Input monitoring fault
A%d (%4.1ddBu,
threshold %4.1ddBu)
Input monitoring fault (External: Cabling) Cabling or signal
source defect.
162 Input monitoring fault Input monitoring fault
A%d (%4.1ddBu,
threshold %4.1ddBu)
Input monitoring fault
163 Input monitoring fault Input monitoring fault
A%d (%4.1ddBu,
threshold %4.1ddBu)
Input monitoring fault
164 Input monitoring fault Input monitoring fault
A%d (%4.1ddBu,
threshold %4.1ddBu)
Input monitoring fault
165 Input monitoring fault Input monitoring fault
D%d (lock %d,
%4.1ddBFS,
threshold
%4.1ddBFS)
Input monitoring fault
166 Input monitoring fault Input monitoring fault
D%d (lock %d,
%4.1ddBFS,
threshold
%4.1ddBFS)
Input monitoring fault
167 Input monitoring fault Input monitoring fault
D%d (lock %d,
%4.1ddBFS,
threshold
%4.1ddBFS)
Input monitoring fault
168 Input monitoring fault Input monitoring fault
D%d (lock %d,
%4.1ddBFS,
threshold
%4.1ddBFS)
Input monitoring fault
169 Ethernet overload Ethernet overload,
throttling active
Ethernet overload Too much network
traffic.
d&b 10D/30D Manual 1.10 en 91