Startup
5.3 Controls and indicators
5.3.1 Mains power switch
The on/off rotary switch [5] is located on the bottom right of the
front panel.
OFF
Mains isolation is not provided. The internal power
supplies are off but remain connected to the mains.
ON The unit is switched on and ready for operation.
5.3.2 TFT color touchscreen - User interface
NOTICE!
The touch panel utilizes a thin flexible sheet that may be damaged
by sharp objects or heavy treatment.
The user interface consists of a 4.3" TFT color touchscreen [6] with
a resolution of 480 x 272 pixels and an additional digital rotary
encoder [7].
The resistive touchscreen responds to pressure and therefore can
be operated by a fingertip, even when wearing gloves or by an
appropriate stylus tip (pen).
d&b D40 Reference manual 1.5 en 19
To Next Page
Loading...
