d&b audiotechnik D40 - Event Log Management

Device setup
Recall: Recalls the settings of a stored preset.
Store: Stores the current amplifier settings to the selected
preset memory.
Clear: The selected preset memory is cleared and «(empty)»
is displayed on the «Name» button.
Note: Choosing one of these functions, a corresponding
confirmation dialog will be issued to allow either confirmation of
the selection or to cancel the action by selecting the Back button
( ).
6.5.7 Event log
The event log stores a maximum of 10000 records. Once the
maximum number of records is reached, the system starts deleting
the first ones.
d&b D40 Reference manual 1.5 en40