EasyManua.ls Logo

d&b audiotechnik D40 - Page 69

d&b audiotechnik D40
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service/Maintenance and care
ID Display text Eventlog text Description Location Possible reasons
83-87 Supply fault Channel '%c' supply
fault XXXX (err %04X,
%5dmV)
Aux. supply voltage
out of range
SMPA Hardware defect
88 Overcurrent Channel '%c' output
overcurrent (CL
counter %3.1ukCnt,
power %uW, temp.
%d°C)
Overcurrent,
Overvoltage on
output
SMPA Short curcuit on
output
89 DC on output Channel '%c' DC
error
DC on output SMPA Hardware defect
90 HF on output Channel '%c' HF error HF on output SMPA Software error
91 Ext. amp. error Channel '%c' ext.
amp. reported an
error (ext. err %04X,
err %04X)
Ext. Amp. controller in
protection
SMPA
92 Ext. amp. no comm. Channel '%c' ext.
amp. no
communication (ext.
err %04X, err %04X)
Ext. amp. no comm.
SMPA
93 Sudden overtemp. Channel '%c' sudden
temporary
overtemperature (i-
peak %3.1dA)
Sudden temporary
overtemperature on
channel
SMPA Current peak on
output
94 Overtemperature %d
°C
Channel '%c'
overtemperature %d
°C (power %uW)
Channel mute due to
overtemperature
SMPA Insufficient cooling
95 Clock fault Channel '%c' clock
fault (%3.1ukHz,
power %uW)
Clock fault SMPA SMPA defect
96 Supply fault Channel '%c' supply
fault 220V (err
%04X, %5dmV)
Supply fault SMPA Hardware defect,
short on output,
SMPA, SMPS defect
97 Rail loss mute Channel '%c' muted
due to rail loss (err
%04X, %3.1dV)
Rail unexpectedly low SMPA Mains voltage loss
98 Mains loss mute Channel '%c' muted
due to mains loss (err
%04X, avg. %3dV)
Mains unexpectedly
not OK
SMPA Mains voltage loss
99 Temp. warning %d°C Channel '%c'
temperature warning
%d°C (power %uW)
High channel
temperature warning
SMPA Insufficient cooling
100 SMPS temp. warning
%d°C
SMPS temperature
warning %3d°C
(power %uW)
High SMPS
temperature warning
SMPS Insufficient cooling
124 OCA remote error OCA remote error
%u
OCA remote error
150 Speaker imp. fault Load Monitoring
impedance error
Speaker defect, cable
160 Input fallback Input fallback (A1=
%d, A2=%d, D1=%d,
D2=%d)
Input Fallback Input Fallback was
activated
d&b D40 Reference manual 1.5 en 69

Table of Contents

Related product manuals