Ethernet to CAN interface
R70 web interface / Recommended browsers
Windows: Microsoft Internet Explorer 6.0 or higher,
Mozilla Firefox 2.0 or higher.
Mac OS: Safari 1 or higher.
Physical setup / IP address
Note: When Power over Ethernet (PoE) is available, the
external power supply is not required.
When the R70 is connected to a network with a DHCP server
present, a matching IP address is assigned to the interface
automatically.
In all other cases, the R70 must be adapted manually.
The R70 IP address is set to 192.168.1.70 by factory default
(see also the label sticker on the rear panel of the R70).
R70
Quick guide (1.1 EN)
14.11.2012 R70 Ethernet to CAN interface
1
To Next Page
Need help?
General
