d&b audiotechnik GmbH R70 operation and configuration
3.6. R70 Web interface
The R70 does not require its own drivers for use with a computer. All
configurations can be set using a standard web browser with JavaScript
enabled.
Recommended web browsers:
Windows Microsoft Internet Explorer 6.0 or higher
Mozilla Firefox 2.0 or higher
Mac OS Safari 1 or higher
3.6.1. Device Info
Clear Errors
The respective error message is reset after the related fault is solved.
Device Restart
The device is rebooted and the current session is disconnected.
Factory Default
The device is set to the default IP address and DHCP is enabled. The
R70 IP address is set to 192.168.1.70 by factory default - see also the
label sticker on the rear panel of the R70.
3.6.2. LAN and CAN Parameters
NOTICE: The "Advanced" pages for the LAN and CAN parameters
are only intended for users with advanced experience and knowledge.
Wrong adjustments or settings can lead to malfunction.
(1.4 EN) Page 15 of 20
To Next Page
Loading...