d&b audiotechnik R70 - 4 R70 Accessories and Anti-Theft Protection (LOCK); Mounting Clamp; Attaching the Mounting Clamp; Anti-Theft Protection - LOCK

d&b audiotechnik GmbH R70 accessories and anti-theft protection (LOCK)
4. R70 accessories and anti-theft protection (LOCK)
4.1. Mounting clamp
The additional Z6123 Bopla mounting clamp allows the R70 interface to
be mounted to:
• Walls or inside touring racks.
• Top hat rails (TS 35 – 35 mm/1.4") inside an equipment cabinet.
4.1.1. Attaching the mounting clamp
The two clamp halves have different lengths. For this reason, we
recommend you to align the clamp or the R70 in such a way that the
short clamp half is located on the top panel of the device (see graphic
opposite).
4.2. Anti-theft protection – LOCK
A slot (LOCK) is located on the right hand side panel of the device and
allows for the attachment of a Kensington lock device.
(1.4 EN) Page 17 of 20