d&b audiotechnik R70 - 5 Manufacturers Declarations; EU Declaration of Conformity (CE Symbol); Disposal (WEEE Symbol)

d&b audiotechnik GmbH Manufacturer's declarations
5. Manufacturer's declarations
5.1. EU declaration of conformity (CE symbol)
This declaration applies to the:
R70 Ethernet to CAN interface, Z6124.000
manufactured by d&b audiotechnik GmbH.
All products of this type starting from variant Z6124.000 are included,
provided they correspond to the original technical version and have not
been subject to any later design or electromechanical modifications.
We herewith declare that said product is in conformity with the
provisions of the following EC directives including all applicable
amendments:
2004/108/EC Electromagnetic Compatibility
2006/95/EC Low Voltage
IEC 60950 (DIN EN 60950): 2001
A detailed declaration is available on request and can be ordered from
d&b or downloaded from the d&b website at
www.dbaudio.com.
5.2. Disposal (WEEE symbol)
This symbol indicates that electrical and electronic equipment must be
disposed of separately from normal waste at the end of its operational
lifetime.
When out of use the device must be disposed of in accordance with the
national environmental regulations.
(1.4 EN) Page 19 of 20