Danfoss VLT AutomationDrive FC 302 - Ordering Numbers for Filters and Brake Resistors; Spare Parts

LCP
LCP 101 Numerical local control panel (NLCP). 130B1124
LCP 102 Graphical Local control panel (GLCP). 130B1107
LCP cable Separate LCP cable, 3 m (9 ft). 175Z0929
LCP kit, IP21 Panel mounting kit including graphical LCP, fasteners, 3 m (9 ft) cable
and gasket.
130B1113
LCP kit, IP21 Panel mounting kit including numerical LCP, fasteners and gasket. 130B1114
LCP kit, IP21 Panel mounting kit for all LCPs including fasteners, 3 m (9 ft) cable
and gasket.
130B1117
External options
EtherNet/IP Ethernet master. 175N2584
Table 13.12 Kits Available for Enclosures E1h–E4h
13.3 Ordering Numbers for Filters and Brake Resistors
Refer to the following design guides for dimensioning specications and ordering numbers for lters and brake resistors:
•
VLT
®
Brake Resistor MCE 101 Design Guide.
•
VLT
®
Advanced Harmonic Filters AHF 005/AHF 010 Design Guide.
•
Output Filters Design Guide.
13.4 Spare Parts
Consult the VLT
®
Shop or the Drive Congurator (www.danfoss.com/drives) for the spare parts that are available for your
application.
How to Order a Drive VLT® AutomationDrive FC 302
200 Danfoss A/S © 01/2018 All rights reserved. MG38C202
1313