Danfoss VLT Micro Drive FC 51 - FC 51 De-Coupling Plate Mounting Instruction for M1 and M2

4.1.10 FC 51 De-coupling Plate Mounting Instruction for M1 and M2
Step 1
Mount metal plate on frequency converter and fasten with
two screws. Tightening torque: 2 Nm.
Illustration 4.19
Step 2
Mount bracket on de-coupling plate.
Illustration 4.20
Step 3
VLT
®
Micro frequency converter FC 51 mounted with de-
coupling plate.
Illustration 4.21
VLT
®
Micro Drive Selection VLT
®
Micro Drive FC 51 Design Guide
MG02K202 - VLT
®
is a registered Danfoss trademark
35
4 4
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com