EasyManua.ls Logo

Daniamant L90 - Technical Specifications and Safety; Product Characteristics; Maintenance and Spares; Health and Safety Information

Daniamant L90
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Characteristics
Light output
2 Cd minimum for 2 hours
Length
380mm
Weight
1080g
Lamp
4 Volt, 0.6 Amp.
Batteries
5 1.5 Volt LR20
Activation
Connecting Line
Self-activating by tilt switch
Unit comes complete with lanyard.
The light will only function when upright.
Fasten to vessel only with L90 mounting bracket
Maintenance
The L90 uses five standard LR20 Alkaline batteries as its power source. These need to be replaced on
a yearly basis to ensure proper function of the light. When replacing batteries, always use one of the
following brands:-
Duracell
®
Plus
Panasonic
®
Xtreme Power
Varta
®
The following spares are available to support the L90.
L90 Bracket Part Number 63-4003
L90 Lamp Part Number 63-1000
L90 Dome Part Number 63-4001
L90 Sealing Ring Part Number 63-8005
Whenever the L90 lamp or the L90 Dome is replaced, the L90 Sealing Ring must be replaced at the
same time.
All spares are held at key distributors around the world.
Health and Safety information
Information on the composition and behaviour of these products is contained in the Product Safety
Data Sheet, available from our website (www.daniamant.com) or on request.
Disposal
Dispose of used lights in accordance with local regulations. This should be done through an approved
environmental disposal agent.