STOP!
PLEASE READ ALL OF THE IMPORTANT INFORMATION
ON THE REVERSE SIDE AND BELOW BEFORE USING YOUR DAP XHOSE
®
PRO
INSTRUCTIONS for using your DAP XHOSE
®
PRO with a SPRINKLER
1. Turn the ON / OFF valve at the end of your XHOSE
®
PRO to the OFF position.
2. Turn the water on at the source and your XHOSE
®
PRO will expand to its maximum length. When using
the XHOSE
®
PRO for the first time, it is recommended to first fill and extend hose and slightly stretch
hose to release tightness in outer folded fabric covering. Then release water and refill to use normally.
3. Attach your sprinkler to the male end with the attached ON / OFF valve.
4. Place your sprinkler in the desired place in your yard or garden
5. Point the sprinkler nozzle away from you and turn the ON / OFF valve to the ON position and walk
away. Your sprinkler will work the same way it works with any ordinary hose.
NOTE: if you are using a sprinkler that is NOT attached to the ground, (such as an oscillating sprinkler),
when you turn the water OFF, your sprinkler may be dragged a short distance as the XHOSE
®
PRO
contracts back to its original length. This should not harm your XHOSE
®
PRO or your sprinkler.
www.xhosepro.com
WARNING
THE DAP XHOSE
®
PRO IS NOT INTENDED
FOR DRINKING WATER USE
Do NOT drink from this hose. The XHOSE
®
PRO is a tool that
is used and stored outdoors and can be exposed to conditions that can
be harmful to humans such as:
Mold & bacteria
Lawn and Garden chemicals
Animal waste
Insects
Stagnant water
Other harmful substances
WARNING
THE DAP XHOSE
®
PRO IS NOT A TOY.
DO NOT ALLOW CHILDREN TO PLAY WITH
OR NEAR THIS PRODUCT.
Do not stretch or expand this hose when it is empty. The XHOSE
®
PRO
is intended to expand only when the water is turned on. This hose can
stretch to up to three times its “relaxed” or original length and if it is
stretched with NO water in it and accidently released, it will quickly
snap back and could cause personal injury.
To Previous Page
Loading...