Page Title Page Title
Paddle
Cover with built-in Pouring Chute
On/Off Switch
Handle
Motor
Power Cord
Mug with built-in Cooling Bowl
∙ 8 ∙
parts & Features
∙ 9 ∙
parts & Features
Remove all packaging from the inside and outside of the My Mug Ice
Cream Maker.
Check that the Ice Cream Maker has no visible damage and that
no parts are missing. Be sure you have all parts and pieces before
discarding packaging.
Before using for the rst time (or after prolonged storage without use),
wash any parts that will come into contact with food. See “Cleaning &
Maintenance”.
Place the Mug with built-in Cooling Bowl in the freezer, and leave it
there for at least 24 hours, until you are ready to make ice cream. The
Mug must be in an upright position—do not place it horizontally. The
temperature in your freezer must be at least 0℉ to allow the ice cream
to freeze properly.
setting up your ice cream maker
1
4
3
2
To Next Page
Loading...
Need help?
General
