∙ 12 ∙
Assembling the maker
TO ASSEMBLE:
After unpacking the Dash Shaved Ice Maker, be sure to clean all parts prior to
rst use. Refer to pages 10-14 for instructions and details. Prior to assembling
the Shaved Ice Maker for use, ensure that the unit is NOT plugged into an
electical outlet. Do NOT assemble the Shaved Ice Maker when it is plugged
into an electical outlet.
1
Place the Base on a stable and dry surface.
2
Install the Motor Unit on the Base (photo A).
3
Align and insert the Exterior Bowl onto the assembled Motor Unit and Base
(photo B). The two notches on the side of the Exterior Bowl should t into the
two notches on the inside of the Motor Unit.
4
Once Exterior Bowl is installed, plug in the Power Cord to an electrical outlet.
BA
To Next Page
Loading...
