Data Aire DAP III - System Configuration and Menus; Programmable Selections & Menu Structure

Network Variable Network Variable Type Description Units
two-with-limits(3)
one-no-limits(4)
two-no-limits(5)
1.3.6.1.4.1.22731.1.2.1.107.0 INTEGER
none(1)
one-heat-strip(2)
two-heat-strips(3)
three-heat-strips(4)
hot-water(5)
Heater Configuration
Factory setting
N/A
1.3.6.1.4.1.22731.1.2.1.108.0 INTEGER
none(1)
computer-non-modutating(2)
computer-modulating(3)
comfort-non-modulating(4)
comfort-modulating(5)
Humidifier Configuration
Factory setting
N/A
1.3.6.1.4.1.22731.1.2.1.110.0 INTEGER
auto(1)
one-leads(2)
two-leads(3)
three-leads(4)
four-leads(5)
Lead-Lag Configuration
N/A
1.3.6.1.4.1.22731.1.2.1.111.0 INTEGER (0..1000)
Maintenance Interval
Hours
1.3.6.1.4.1.22731.1.2.1.112.0 INTEGER (0..99)
Front Panel Password
N/A
1.3.6.1.4.1.22731.1.2.1.113.0 INTEGER
not-used(1)
data-processing-manager(2)
maintenance-engineer(3)
service-company(4)
custom-contact-message(5)
Person To Contact
N/A
1.3.6.1.4.1.22731.1.2.1.114.0 INTEGER
auto-no-message-or-alarm(1)
auto-message-and-alarm(2)
manual-msg-alarm-relay(3)
Reset Mode
N/A
1.3.6.1.4.1.22731.1.2.1.115.0 INTEGER
off(1),
short(2)
long(3)
full(4)
Buzzer Configuration
N/A
1.3.6.1.4.1.22731.1.2.1.116.0 OCTET STRING
Each octet represents the index of
one current alarm from the
following table.
waterDetected(1)
noAirFlow(2)
dirtyFilter(3)
humidifierProblem(4)
lowVoltage(5)
fireAlarm(6)
shortCycle(7)
powerProblem(8)
humiditySensor(9)
temperatureSensor(10)
maintenanceRequired(11)
Alarm Relay 1 Settings
N/A
Document 600-000-615
12