Data Aire gForce Ultra - 8.2.10 Menu J - Factory Settings

gForce Ultra IOM
75
Local Control for Charging
• Press the “Hand on” button. The display will show Hand Local Running.
• Use the  and  keys to move the cursor to the desired digit position, then use the  and
 keys to increase or decrease the desired RPM setting. As you change the value, the
compressor will increase or decrease in speed.
• See example display below:
• When done charging, press the “Auto on” key to return to normal operation controlled by the
dap4 controller.
To View the Drive Alarms
• Press the Alarm log key
• Use the  and  keys to move the cursor through the various alarms.
• See example display below: