Data I/O 29B User Manual

Procedure for connecting power to the programmer.

How to check and set the correct operating voltage for the device.

Steps to check or replace the main line fuse for safety.

Importance and procedure for grounding the programmer unit for safety.

Steps to turn on the programmer and initiate the self-test routine.

Transferring data from a master device to the programmer's RAM.

Loading data into RAM from an external serial port.

Copying data from RAM to program a device.

Checking data integrity after transfer or programming.

Controlling the programmer using a computer over CRC protocol.

A list of error codes, their descriptions, and corrective actions.