Datacolor Spyder 5 User Manual

Step 2 – Prepare for Calibration
Ensure your Spyder5 is plugged into a powered USB port on your computer
before you launch the Spyder5 application. Follow the step-by-step on-screen
instructions. Remove the lens cap from the Spyder5 colorimeter.
Hang the Spyder5 unit over your display when asked, using the lens cap, which
slides on the USB cable, as a counterweight to keep it in place. If necessary,
angle your display back to keep the Spyder5 flat against your screen.

Datacolor Spyder 5 Specifications

General

Brand	Datacolor
Model	Spyder 5
Category	Test Equipment
Language	English