profiling controls, so the use of a RIP with these inks is no longer necessary.
Spyder3Print owners would choose an ICC Capable Black and White inkset, for the
advantages noted in that section below.
ICC Capable Black and White Inksets, Manufacturer’s Color Driver **
This method offers richer grays than manufacturers inks by increasing the number of
gray inks, but also limits the printer to only gray and tinted gray prints while these
inks are installed. This method allows many of the ICC advantages of the category
above. The available tints are limited to inkset's range. This method requires
Spyder3Print 2.0, and ICC profilable inks (see list below).
MIS Inks and InkJet Mall both produce ICC Capable inkets.
The most effective MIS inkset for ICC-based control is called UT-3D. Inks for the
following Epson printer models are available as UT-3D inks:
R200, R220
R300, R300M, R320, R340
RX500, RX580, RX600, RX620
R800, R1800 (may use a different inkset name)
1280, 1290
2100, 2200, 4000, 7600, 9600
2400, 3800, 4800, 7800, 9800
Jon Cone’s InkJet Mall K6 and K7 inks in any tint can be profiled with Spyder3Print.
Advanced Topic: Profiling an ICC Capable Black and White Inkset
The process of profiling an ICC Capable black and white inkset is simple:
• Install the inks, and make sure they are printing correctly.
To Next Page
Loading...