Save Template
This option allows users to batch process profiles. Set printer data as desired, choose
Save Template, name your Measurement Set, and select the desired Target. Repeat to
define other Measurement Sets. Printed targets with accurate information from these
batch-created templates can be printed by choosing the template in the lower half of
the Measure Patches screen, backing up one screen to the Select Target screen, and
printing. Repeating this process will print all the desired targets with the correct
printer info on each.
Skip to Profiling Process
If you do not need assistance checking that your printer is properly configured, and
that all inks or colorants are printing as desired, or assistance in determining the
optimal media setting for your chosen paper, then use this button to skip ahead to the
profiling process. We do recommend that you run through the process in its entirety at
least the first time you profile so that you have a complete understanding of the
program.
Further Information
For information such as a list of Frequently Asked Questions and details on all
Datacolor products be sure to visit our website:
http://www.datacolor.com/Spyder3
To Next Page
Loading...