Print Quality Check
Skip to:
Help Index
Print Quadrant Function
Spotting Missing Ink Channels
Usual Setting
Print the Quality Check Print, examine for problems, then select the Next Button to
continue.
The Purpose of This Step
This screen allows you to print a Quality Check Print to assure that your printer is
printing correctly before printing a Color Profiling Chart. If your printer is not printing
properly, then the resulting profile will not correctly describe your printer.
The Long Answer
Print Quadrant Function: You can print up to four different Quality Checks on a
single Letter or A4 sheet by selecting different quadrant settings for each, and
reinserting the same sheet of paper, the same side up, and in the same orientation,
for each Quality Check print. The preview image on the right side of the window
indicates which quadrant the Quality Check image will be printed in.
Page Setup: Spyder3Print is designed to be used in Landscape (Horizontal) mode, so
it is recommended that you use it in that orientation. It is optimized for Letter or A4
paper, so it is most effective to print your media setting check prints on these sheet
sizes.
Examine the Quality Check Print for areas with skipped lines or poor print quality. If
such areas are evident, then use your printer’s cleaning command to clear up the
problem before continuing. If repeated clean commands (and rest periods after each
set of three cleaning commands) do not correct the problem, let the printer rest
To Next Page
Loading...