Remote Profiling
Skip to:
Help Index
E-mailing Target Files
Printing from Demo Mode
Printing to Indirect Devices
Usual Setting
E-mail selected target from Targets subfolder to user for remote printing; or have
remote user download Spyder3Print from the Datacolor website (
URL below) and use
in Demo mode to allow access to all the pre-profiling fuctions during the remote target
printing process.
The Purpose of This Step
This step allows Spyder3Print owners to profile printers that are not at the same
physical location as their Spyder3Print installation. Please review the Spyder3Print
license agreement for details on profile usage.
The Long Answer
E-mailing Target Files
It is possible to e-mail the selected Spyder3Print profiling target, from the Targets
subfolder, to the remote location, where it will be printed and returned for patch
reading and profile building. However, there are a number of possible errors the
remote user could make when opening the target file, setting the printer up to print
the target file, or printing the target file, and there are settings choices that need to
be made for optimal results.
To Next Page
Loading...