Marking Software Upgrade
122
Arex™ 400
14.Depending on whether the Lighter™ Suite update includes any control
board updates different procedure should be followed:
• Procedure with laser control board upgrade
:
- press OK to execute control board update
- upon completion, a window informs the user
that data is automatically saved in
the operating system
- operating system will be shut down automatically within the next 10 seconds
W
ARNING
DO NOT turn OFF or UNPLUG the laser marker while Windows® is shutting down!
- wait until the operating
system shuts down automatically (black screen)
- PO
WER OFF the laser marker to complete installation
- PO
WER ON the laser marker and wait until the operating system is restarted
automatically
• Procedure without laser control board upgrade:
- A window informs the user that data is automatically saved in the operating
system
- operating system will be restarted automatically within the next 10 seconds
W
ARNING
DO NOT turn OFF or UNPLUG the laser marker while Windows® is restarting!
- wait until the operating system is restarted automatically
To Next Page
Loading...