Control Rack installation
User Manual 7
Control Rack installation
Horizontal installation
The control rack must be positioned in a safe manner, following the recommen-
dations below:
Figure 2: Control rack horizontal positioning
The control rack can be installed on a standard 19" rack cabinet using the fixing
brackets supplied as a standard equipment with XXX-X6X models and as an
accessory for XXX-X5X models (see "Ra
ck Handles" on page 71).
The figure below shows the fixing points for installation in a rack cabinet. Rack
ha
ndles for an easier installation are available as an accessory (see "Ra
ck Han-
dles" on page 71).
Using the fixing brackets is possible to install the control rack in three different
positions
inside the cabinet:
Figure 3: Control rack fixing bracket mounting configuration
NOTE
All dimensions are in millimeters.
To Next Page
Loading...