Installation
8
Arex™ 400
Using this position the fixing brackets are aligned with the console.
Figure 4: Control rack fixing brackets mounting position 1
Using this position the fixing brackets are aligned with the frontal grid panel.
Figure 5: Control rack fixing brackets mounting position 2
Use this position if you want to use a pre-existing integration for AREX™ 3 and it
is required that the back panel of AREX™ 400 is in the same position as the back
panel of AREX™ 3 inside the cabinet.
Figure 6: Control rack fixing brackets mounting position 3
To Next Page
Loading...