Datalogic Arex 400 - Technical Characteristics

Technical Characteristics
User Manual 19
Technical Characteristics
AREX™ 400 MODELS A20-X6X 110-XXX 120-XXX 130-X6X 150-X6X
Electrical specifications
Input Voltage (main power supply) V (AC) 100 to 240 @ 50-60 Hz
Max. Input Current (main power supply) A 3 - 1.25 4 - 1.7
Max power W 300 400
Laser Source specifications
1
1. Specification @ 25°C
Laser Type Pulsed Fiber Laser
Nominal Average Power W 20 10 20 30
50
Pulse Energy (max.) mJ ≥ 0.75 1
Peak Power (max.) kW ≥ 10 10
Central Emission Wavelength nm 1050-1080 1064
Typical Nominal Pulse Width ns 4 to 250
100
Repetition Rate kHz 20 to 500 2 to 200
Laser Aiming Beam / Focus Beam
Class 2: 650 nm
Environmental specifications
Operating temperature
°C
°F
5 to 40
41 to 104
5 to 35
41 to 95
Storage Temperature
°C
°F
-10 to 60
14 to 140
Humidity %
< 90 without condensation
Altitude m < 2000
Shock and Vibration
MIL 810E ”CAT1 Basic Transportation”
Package Drop Test cm 60
Pollution Degree 2
Overvoltage Category II
Physical specifications
2
2. Without F-Theta scan lens
Control Rack dimensions (HxWxD)
mm
in
113x432x434
4.4x17x17.1
Control Rack Weight
Kg
lbs
17.5
38.5
Control Rack IP Rating IP31 (in horizontal position, otherwise IP30)
Control Rack Cooling Forced Air Cooling
Scan Head dimensions (HxWxD)
mm
in
96x90x326
3.7x3.5x12.8
Scan Head Weight
Kg
lbs
3.5
7.7
Scan Head IP Rating
3
3. Not considering F-Theta scan lens
IP64 (not considering F-Theta scan lens)
Scan Head Cooling
Air Cooling
Noise dB (A) < 65 at 1 meter
Head Cable minimum bending radius
mm
in
80 (fixed installation); 11
0 (mobile installation)
3.15 (fixed installation); 4.33 (mobile installation)
Head Cable Length
mm
in
2885
113.5
Beam deflection
High speed galvanometer scanning system
Other specifications
Marking Speed
4
4. May vary: measured with f =160mm
mm/s Up to 10000
Char Marking Speed
5
5. Single line string, Roman-s font, 1mm height
char/s Up to 600
MOF (Marking on the fly) YES [constant speed or encoder]
Line speed - Productivity
m/min
pcs/s
Up to 75
3
Marking Control and Software
EMC (Embedded Marking Control) and Lighter™ Suite
Communication RS232, Ethernet (TCP/IP 10, 100 Mbit), Ethernet/IP, digital I/O