Connections
User Manual 45
Connections
The laser marker connections are described here below. Follow the operations as
described.
W
ARNING
Control rack and scan head are joined by a connection cable 3 meters long. Control rack
and scan head are NOT separable.
Connecting Command Box connector
The Command Box connector must always be inserted with properly signals pro-
vided in order to use the laser marker. The absence of such connector blocks the
l
aser marker operations.
W
ARNING
If the Command Box Muting Device provided is connected, the laser marker enable is
bypassed.
Figure 1: Connecting Command Box connector
To Next Page
Loading...