Datalogic CBX500 - Pinout Information

CBX500 INSTALLATION MANUAL
14
TECHNICAL FEATURES
ELECTRICAL FEATURES
Supply Voltage
10 to 30 Vdc*
Consumption
0.8 – 0.5 A
Limited Current Consumption
CBX + reading device consumption
(see related manual)
2.5 A
USER INTERFACE
LED Indicators
Power On/Polarity Error (blue/red)
Trigger (yellow)
IN2 (green)
OUT1 (yellow)
OUT2 (green)
PHYSICAL FEATURES
Mechanical Dimensions
193 x 180 x 71 mm
(7.6 x 7.1 x 2.8 in.)
Weight
about 780 g. (27.5 oz.)
ENVIRONMENTAL FEATURES
Operating Temperature
0° to 50 C (+32° to 122 °F)
Storage Temperature
-20° to 70 C (-4° to 158 °F)
Humidity max.
90% non condensing
Vibration Resistance
14 mm @ 2 to 10 Hz
EN 60068-2-6
2 hours on each axis
1.5 mm @ 13 to 55 Hz
2 g @ 70 to 200 Hz
Shock Resistance
30 g; 11 ms;
EN 60068-2-27
3 shocks on each axis
Protection Class
EN 60529
IP65 **
The features given are typical at a 25 C ambient temperature (if not otherwise indicated).
* for further details about minimum/maximum supply voltage refer to the manual of the
connected reading device, since the minimum supply voltage required may be >10.
** when compression connectors and reading device are correctly connected.
If Host Interface (Fieldbus) Modules are used, only correctly installed IP65 models
guarantee IP protection. Protection is not guaranteed when Standard Fieldbus Modules
are mounted.