Datalogic CBX500 - Accessories and Grounding; Available Accessories; Network Grounding Rules

CBX500 INSTALLATION MANUAL
4
ACCESSORIES
The following accessories are available on request for the CBX500:
Name
Description
Part Number
* BM100
Backup Module
93ACC1808
* BM150
Display Module
93ACC1809
* BM200/210
Ethernet TCP/IP Module STD/IP65
93ACC1851, 93ACC1852
* BM300/310
Profibus Module STD/IP65
93ACC1810, 93ACC1811
* BM400
DeviceNet Module IP65
93ACC1814
* BM500/510/520
EtherNet/IP Module STD/IP65/IP54
93ACC1812, 93ACC1813,
93ACC1840
* BM600
CANopen Module STD
93ACC1815
* BM700/710
Profinet Module STD/IP65
93ACC1816, 93ACC1886
* BM1100
CC-Link Module STD
93ACC1845
* BM1200/1210
Modbus TCP STD/IP65
93ACC1848, 93ACC1849
BA100
DIN Rail Adapters
93ACC1821
BA200
Bosch Adapters
93ACC1822
BA300
M12 3PF Service Connector
93ACC1877
BA400
M12 3PM External Power Connector
93ACC1853
BA500
M12 4PF Trigger Connector
93ACC1854
BA600
M12 5PF ID-NET Out Connector
93ACC1855
BA700
M12 5PM ID-NET In Connector
93ACC1856
BA900
Two Cable Compression Conn. Panel
93ACC1847
NOTE: Not all readers support all CBX accessories. Compatibility
between the accessories marked with an asterisk (*) and your reader
depends on the reading device application software. See the "Accessories"
paragraph in your reading device Reference Manual for the list of supported
CBX Series accessories.
SAFETY PRECAUTIONS
ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT
POWER SUPPLY
This product is intended to be installed by Qualified Personnel only.
This product is intended to be connected to a UL Listed Direct Plug-in Power Unit marked LPS
or “Class 2”.
CAUTION: Total power consumption is given by adding the CBX500 power
consumption to that of all the devices powered through the CBX500 (reading
device, P.S., I/O). Refer to the manual of the connected devices for details
about minimum/maximum supply voltage and power consumption.
Each CBX500 supports only 1 single reading device + system accessories.