Datalogic Applications
138 DL-Axist™
location is a persistent location, so log files stored here are safe if the
PDA reboots. If a MicroSD card is used, you may wish to specify that
logs be kept on the card if the card has greater capacity than
on-board flash. MicroSD cards are also persistent.
To enable DXU Agent logging on your device:
1. Resume your device and unlock its screen.
2. Launch the DXU Agent application.
3. Tap the Menu button to display the menu.
4. Tap the Settings button.
5. Clear the “Enable Service” check box.
6. Select the “Enable Log” check box.
7. Select the “Enable Service” check box.
8. Clean up by tapping the Home button.
To specify where log files are stored on your device:
1. Resume your device and unlock its screen.
2. Launch the DXU Agent application.
3. Tap the Menu button to display the menu.
4. Tap the Settings button.
5. Clear the “Enable Service” check box.
NOTE
You must clear “Enable Service” before you can change
any setting in DXU Agent.
To Next Page
Loading...
