Datalogic Applications
User’s Manual 139
6. Tap the “Change Log File Location” button.
7. Type a valid path on your device into the “Change Log File
Location” field, and then tap the OK button.
8. (Optional, but desired if you wish to log to this new location)
Select the “Enable Log” check box.
9. Check the “Enable Service” check box.
10. Clean up by tapping the Home button.
Set User Names, Passwords, and Prompt for Authentication on
DXU Configuration Files
Configurations and configuration files can require authentication to
open and apply. DXU implements an invisible sort of authentication
by automatically applying a default user name and password to
every DXU configuration and configuration file. You can display an
authentication prompt whenever anyone attempts to connect to
one of your devices with DXU, and change both the user name and
password as well to increase security of your devices.
Enable Authentication in DXU Agent
You can ensure that users are prompted to enter a user name and
password to open a configuration file in the DXU console or to DXU
Agent’s Settings window on a device. This capability is enabled with
a single check box in DXU Agent.
To enable authentication:
NOTE
You must clear “Enable Service” before you can change
any setting in DXU Agent.
To Next Page
Loading...
