Datalogic DL-Axist - Page 148

Datalogic Applications
140 DL-Axist™
1. Resume your device and unlock its screen.
2. Launch the DXU Agent application.
3. Tap the Menu button to display the menu.
4. Tap the Settings button.
5. Clear the “Enable Service” check box.
6. Select the “Is Authentication Required” check box.
7. Select the “Enable Service” check box.
8. Clean up by tapping the Home button.
To authenticate while opening DXU Agent’s Settings window:
1. Resume your device and unlock its screen.
2. Launch the DXU Agent application.
3. Tap the Menu button to display the menu.
4. Tap the Settings button.
5. Type your password into the “Enter Password” field, and then
tap the OK button.
NOTE
You must clear “Enable Service” before you can change
any setting in DXU Agent.