Datalogic DM3610 - Dimensioning Setup and Calibration; System Setup Procedures

DC3000 USER INTERFACE
97
4
2. View system information and interact with the Monitor as described below.
Field Name
Action/Definition
System Status
Network (1-2) – GREEN indicates connection to an
active host. Blank/Gray indicates there is no active
connection.
Tach – GREEN indicates the tachometer input. The LED
is activated upon tachometer input regardless of
tachometer source and indicates a non-zero belt speed.
Trigger – GREEN indicates the trigger input. The LED is
activated upon trigger input regardless of trigger source
(including software trigger).
Good/No Dim – GREEN indicates a good (valid)
dimension has been calculated. RED indicates a no-dim.
System Information
Belt Speed – The conveyor speed is displayed in feet
per minute (fpm) or meters per second (m/s)
Package Count – Indicates the total number of
packages that have passed through the system since
last reset.
Valid Dim Count – Indicates the total number of valid
package dimensions captured by the system since last
reset.
No Dim Count – Indicates the total number of NO DIM
packages passed through the system since last reset.
Legal for Trade Status
Ready – GREEN indicates the system settings meet
Legal for Trade requirements. RED indicates that a
system setting or performance does not meet Legal- for-
Trade requirements. Click Show to display status details
in the Message pane.
Messages
Displays diagnostic messages and dimension results.
Message Monitor
Displays the outgoing host message from the port
selected below.