Error Codes
Quick Reference Guide 21
Error Codes
Upon startup, if the reader sounds a long tone, this means the
reader has not passed its automatic Selftest and has entered FRU
(Field Replaceable Unit) isolation mode. If the reader is reset, the
sequence will be repeated. Press and release the trigger to hear the
FRU indication code.
The following table describes the LED flashes/beep codes associ-
ated with an error found.
Number of
LED
Flashes/
Beeps
Error Corrective Action
1 Configuration
Contact Helpdesk
for assistance
2 Interface PCB
6Digital PCB
11 Imager
To Next Page
Loading...
