Datalogic Gryphon I GFS4400 - China Sensible Code Set Length 2

2D Symbologies Enter/Exit Programming Mode
Product Reference Guide 193
China Sensible Code Set Length 2
This feature specifies one of the bar code lengths for China Sensible Code Length Control.
Length 2 is the maximum label length if in Variable Leng
th Mode, or the second fixed length if
in Fixed Length Mode. Characters can be set from 0001 to 7,827 characters in increments of
0001 (pad with zeroes).
See page 253 for detailed instructions on setting this feature.
$CCSL2
Select China Sensible Code Length 2 Setting
To configure this feature, scan
the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at
left followed by the digits from the Alphanumeric
characters in
Appendix E, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar co
de again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 7,827 Characters