Datalogic Gryphon I GPS4400 - Page 31

Indicators
Quick Reference Guide 27
Programming Mode - The following indications ONLY occur when the
reader is in Programming Mode
.
Indicator Description LED Beeper
Label Program-
ming Mode Entry
A valid programming
label has been
scanned.
LED blinks con-
tinuously
Reader sounds
four low fre-
quency beeps.
Label Program-
ming Mode Rejec-
tion of Label
A label has been
rejected.
N/A
Reader sounds
three times at
lowest frequency
and current vol-
ume.
Label Program-
ming Mode Accep-
tance of Partial
Label
In cases where multi-
ple labels must be
scanned to program
one feature, this indi-
cation acknowledges
each portion as it is
successfully scanned.
N/A
Reader sounds
one short beep at
highest frequency
and current vol-
ume.
Label Program-
ming Mode Accep-
tance of
Programming
Configuration
option(s) have been
successfully pro-
grammed via labels
and the reader has
exited Programming
Mode.
N/A
Reader sounds
one high fre-
quency beep and
4 low frequency
beeps followed by
reset beeps.
Label Program-
ming Mode Cancel
Item Entry
Cancel label has been
scanned.
N/A
Reader sounds
two times at low
frequency and
current volume.