Datalogic Gryphon I GPS4400 - ISBT 128 Concatenation Mode

Enter/Exit Programming Mode 1D Symbologies
120 Gryphon™ GPS4400
ISBT 128 Concatenation Mode
Specifies the concatenation mode between Static and Dynamic.
DEFAULT
$CI8CM00CR)
ISBT 128 Concatenation Mode = Static
$CI8CM01CR)
ISBT 128 Concatenation Mode = Dynamic
This option is only valid when ISBT 128 Concatenation is enabled (see " ISBT 128 Con-
catenation" on page 119
).