Datalogic Gryphon I GPS4400 - 2 D Normal;Inverse Symbol Control

Enter/Exit Programming Mode 2D Symbologies
174 Gryphon™ GPS4400
2D Normal/Inverse Symbol Control
Specifies the options available for decoding normal/negative printed 2D
symbols. This configuration item applies globally to all the 2D symbologies
that support that feature according to Standard AIM Specification: Data
Matrix, QR, MicroQR, Aztec and Chinese Sensible Code.
To decode all symbologies, including linear symbologies, refer to "Decode
Negati
ve Image" on page 76
DEFAULT
$CIPNR00(CR)
Normal/Inverse Symbol Control = Normal
$CIPNR01(CR)
Normal/Inverse Symbol Control = Inverse
$CIPNR02(CR)
Normal/Inverse Symbol Control =
Both Normal and Inverse
.