Datalogic Gryphon I GPS4400 - China Sensible Code Set Length 1

2D Symbologies Enter/Exit Programming Mode
Product Reference Guide 179
China Sensible Code Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Control.
Length 1 is the minimum label length if in Variable Length Mode, or the first
fixed length if i
n Fixed Length Mode. Characters can be set from 0001 to
7,827 characters in increments of 0001 (pad with zeros).
See page 241 for detailed instructions on setting this feature.
$CCSL1
Select China Sensible Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at
left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar co
de again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character