Datalogic Gryphon I GPS4400 - Data Matrix Set Length 2

2D Symbologies Enter/Exit Programming Mode
Product Reference Guide 183
Data Matrix Set Length 2
This feature specifies one of the bar code lengths for Data Matrix Length Con-
trol. Length 2 is the maximum label length if in Variable Length Mode, or the
second fi
xed length if in Fixed Length Mode.
Characters can be set from
0001 to 3,116 characters in increments of 0001 (pad with zeros).
See page 241 for detailed instructions on setting this feature.
$CDML2
Select Data Matrix Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at
left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar co
de again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
Length 2 is 3,116 Characters