Product Reference Guide
22
RS-232/USB-COM INTERFACES
INTERCHARACTER DELAY on page 23
BEEP ON ASCII BEL on page 23
BEEP ON NOT ON FILE on page 24
ACK NAK OPTIONS on page 24
ACK CHARACTER on page 25
NAK CHARACTER on page 25
ACK NAK TIMEOUT VALUE on page 26
ACK NAK RETRY COUNT on page 26
ACK NAK ERROR HANDLING on page 27
INDICATE TRANSMISSION FAILURE on page 27
DISABLE CHARACTER on page 28
ENABLE CHARACTER on page 28
The programming bar codes in this chapter allow modifications to the stan-
dard RS-232 and
USB-Com interfaces. Reference Appendix B, Standard
Defaults for a listing of standard factory settings.
To Next Page
Loading...
